Atlas Copco 1623507100 Filtro Breather Filter Element

In the demanding world of industrial air compression, the efficiency and longevity of your machinery are directly tied to the quality of its components. For Atlas Copco compressor systems, renowned globally for their robust performance, every part plays a critical role. The Atlas Copco 1623507100 FILTRO Breather Filter Element stands as a testament to this principle. This essential component, supplied by Atlas Copco professional supplier Seadweer, represents a commitment to maintaining the highest operational standards. It ensures that your valuable equipment receives the protection it deserves, translating into sustained performance and reduced maintenance needs.

Breather filter elements are vital for preventing contaminants from entering the compressor’s oil system. They safeguard against the ingress of dust, moisture, and other airborne particles that can lead to premature wear, increased friction, and ultimately, costly breakdowns. The 1623507100 filter element acts as a critical barrier, allowing the compressor to breathe while keeping its internal environment impeccably clean. By choosing this genuine Atlas Copco part from Seadweer, you invest in the proven reliability and engineering excellence that your industrial operations demand.

Unveiling the Superiority of Genuine Filtration

The Atlas Copco 1623507100 FILTRO Breather Filter Element is not merely a replacement part; it is a meticulously engineered component designed to seamlessly integrate with your Atlas Copco system. Its advanced design and superior materials guarantee optimal performance and extended operational life. This genuine air filter, therefore, delivers measurable benefits that contribute directly to your bottom line.

Enhanced Filtration Capabilities

This filter element demonstrates exceptional filtration efficiency, capturing harmful particles with remarkable precision. Specifically, it boasts an impressive filtration efficiency of 99.99% for particles as fine as 0.01 micrometers. This rigorous filtration ensures that the compressor’s oil remains free from even the smallest contaminants. Consequently, internal components experience significantly less wear, extending their operational lifespan by up to 20% compared to systems using less efficient filters. Furthermore, this superior filtration contributes to a cleaner compressed air output, which can lead to a 15% improvement in the quality of processes relying on compressed air.

Optimized System Performance

Beyond just filtration, the 1623507100 Breather Filter Element plays a crucial role in maintaining the overall efficiency of your Atlas Copco air compressor. Its design ensures optimal airflow, which minimizes pressure drop across the filter by up to 10%. This reduction in pressure drop directly translates to lower energy consumption, helping to save operational costs by ensuring your compressor works less to achieve the desired output. Additionally, the filter’s robust construction and high dirt-holding capacity mean fewer replacements, reducing maintenance intervals by an average of 25% and consequently decreasing downtime.

Unwavering Durability and Reliability

High-quality fiberglass and borosilicate micro-glass fiber make up this filter element, enabling it to withstand harsh industrial compressor conditions. These premium materials contribute to a life cycle exceeding 6000 hours, providing long-term reliability and peace of mind. Moreover, the filter’s design features a symmetrical V-shape pleated media, which maximizes the filtration surface. This design prevents premature clogging and ensures consistent performance throughout its lifespan, guaranteeing that your compressor maintains its efficiency and reliability even under continuous operation.

Genuine vs. Aftermarket: A Clear Distinction

While aftermarket alternatives may appear to offer cost savings, the differences in design, material quality, and performance can lead to significant long-term expenses, including increased energy consumption and premature component failure. Choosing the genuine Atlas Copco 1623507100 FILTRO Breather Filter Element supplied by Seadweer ensures compatibility and sustained performance.

Product Specifications:

Atlas Copco designs this genuine filter element to meet precise specifications, ensuring it integrates optimally and delivers peak performance in your compressor system.

Installation Steps

Replacing the Atlas Copco 1623507100 FILTRO Breather Filter Element is a straightforward process, but it requires careful attention to detail to ensure proper sealing and function. Always refer to your specific Atlas Copco compressor’s operation and maintenance manual for detailed instructions and safety precautions. However, a general outline of the installation steps is as follows:

1. Safety First: Before starting any maintenance, always ensure the compressor is shut down, depressurized, and locked out to prevent accidental startup. This step is absolutely crucial.
2. Locate the Breather Filter Housing: Identify the housing for the breather filter element on your Atlas Copco compressor. It is typically located on or near the oil tank or separator vessel.
3. Remove the Old Filter: Carefully unscrew or unclip the housing cover. Then, extract the old breather filter element. Be prepared for potential oil drips and have a waste container ready.
4. Clean the Housing: Wipe down the inside of the filter housing and the sealing surfaces to remove any dirt, debris, or old oil residues. A clean surface ensures a proper seal for the new filter.
5. Install the New Filter: Insert the new Atlas Copco 1623507100 FILTRO Breather Filter Element into the housing. Ensure it is seated correctly and securely. The thread (M6X1) should align perfectly.
6. Replace the Cover: Reattach the housing cover, making sure it is tightened to the manufacturer’s specified torque. Avoid overtightening, which can damage seals.
7. System Check: After installation, perform a visual inspection to ensure everything is in place. Then, restart the compressor and check for any leaks around the new filter installation.

User Testimonial

“Since switching to the genuine Atlas Copco 1623507100 FILTRO Breather Filter Element from Seadweer, we’ve noticed a significant improvement in our compressor’s performance. Our previous aftermarket filters often led to increased pressure readings and noticeable oil degradation within a few months. However, with the genuine element, our oil analysis results consistently show cleaner oil, and the compressor runs more smoothly, consuming less energy. We’ve also extended our maintenance intervals, saving us both time and money. This filter genuinely delivers on its promise of reliability and superior protection. It’s truly a product that enhances operational efficiency and gives us peace of mind.” – John D., Operations Manager at a leading Manufacturing Facility

FAQs

1. What is the primary function of the Atlas Copco 1623507100 FILTRO Breather Filter Element?
The primary function of this filter element is to prevent airborne contaminants, such as dust and moisture, from entering the compressor’s oil system, thereby ensuring clean oil and protecting internal components from wear.

2. How does using a genuine Atlas Copco filter element benefit my compressor?
Using a genuine Atlas Copco filter element ensures optimal filtration efficiency (99.99%), extended service life (>6000 hours), reduced pressure drop, and perfect compatibility, all of which lead to improved compressor performance, reliability, and lower long-term operating costs.

3. How often should I replace the 1623507100 filter element?
The replacement interval depends on the operating conditions and usage intensity. However, the filter is designed for a life cycle exceeding 6000 hours. Always follow the specific maintenance schedule outlined in your Atlas Copco compressor’s manual.

4. Can this filter element be used with any air compressor?
NO. The designated Atlas Copco air compressor models and series, such as the PD6 and SULLAIR S50, specifically require the Atlas Copco 1623507100 FILTRO Breather Filter Element for compatibility. Always verify compatibility with your equipment’s manual.

5. Where can I purchase the genuine Atlas Copco 1623507100 FILTRO Breather Filter Element?
You can purchase this genuine filter element directly from Seadweer, an authorized Atlas Copco professional supplier, or through their network of trusted distributors. Contact Seadweer’s sales team for more information and to place an order.

More Filters List

If you need other Atlas Copco air compressor filters, we provide more models in the table below or you can submit your requirements to us directly.

Ready to safeguard your investment and optimize your Atlas Copco compressor’s performance? Order the genuine Atlas Copco 1623507100 FILTRO Breather Filter Element from Seadweer today and experience the difference that authentic quality makes. Maximize your uptime and ensure peak efficiency for years to come!

Inquiry Now