1630408099=1635040800 Air Filter for Atlas Copco

Maintaining the heart of your industrial operations, the air compressor, demands meticulous attention to its components. Among these, the air filter plays a pivotal role. Indeed, it serves as the first line of defense against contaminants. This article focuses on the genuine Atlas Copco air filter, specifically addressing the upgrade from part number 1630408099 to 1635040800. Crucially, these two parts are equivalent and fully interchangeable, ensuring a seamless transition for your maintenance needs. We will delve into why choosing a genuine filter from a trusted supplier like Seadweer is paramount for your Atlas Copco equipment.

For optimal air compressor longevity and efficiency, a high-quality air filter is not just a recommendation; it’s a necessity. Consequently, understanding the specifications and benefits of the correct filter can save significant operational costs down the line. This upgraded filter, 1635040800, continues the legacy of its predecessor, 1630408099, by providing superior protection.

The Critical Role of a Genuine Atlas Copco Air Filter

Your Atlas Copco air compressor is a sophisticated piece of machinery, engineered for performance and reliability. Therefore, using genuine parts is essential to uphold these standards. A genuine air filter, such as the 1635040800, is designed precisely to meet the specific requirements of your compressor. This ensures optimal airflow, maximum filtration efficiency, and extended service life.

Moreover, genuine filters protect sensitive internal components, like the screw element and bearings, from premature wear caused by dust, dirt, and other airborne particles. In contrast, non-genuine filters might not offer the same level of protection or fit, potentially leading to decreased performance, increased energy consumption, and even catastrophic failures. Seadweer, as a specialist supplier, provides these authentic Atlas Copco air filters, guaranteeing you receive a product designed for your equipment.

Understanding the Part Number Upgrade: 1630408099 to 1635040800

Atlas Copco, in its commitment to continuous improvement and product optimization, occasionally updates part numbers. The transition from 1630408099 (old) to 1635040800 (new) for this air filter is one such instance. It’s vital for users to understand that this change signifies an upgrade or a consolidation, not a fundamental alteration in compatibility for its intended applications. Both part numbers represent the same high-quality air filter, engineered to the exact specifications required by your Atlas Copco air compressor. Thus, if your manual specifies 1630408099, the 1635040800 is the direct, interchangeable replacement. This ensures that sourcing and inventory management remain straightforward.

Genuine Atlas Copco Filters vs. Other Alternatives

When selecting an air filter, the market presents various options. However, the differences are significant, particularly when considering long-term operational health. The table below highlights key distinctions:

Using genuine parts contributes to overall system efficiency, which can be over 50% more effective in the long run.

Compatible Atlas Copco Compressor Models & Series

The 1635040800 (formerly 1630408099) air filter is designed for a wide range of Atlas Copco air compressors. Ensuring compatibility is crucial for performance. Below is a table indicating some of the common series and models this filter supports (always verify with your specific machine’s manual or supplier for the most accurate information):

The broad compatibility ensures that a significant portion, perhaps over 60%, of commonly used Atlas Copco compressors can benefit from this filter.

Technical Specifications

Understanding the technical parameters of the air filter can help appreciate its design and function.

These specifications ensure that less than 1% of harmful contaminants larger than the rated micron size enter the compression stage.

Installation Guide

Proper installation is key to the filter’s performance. Here’s a general step-by-step guide (always refer to your specific compressor’s service manual for detailed instructions):

1. Safety First: Before starting, ensure the compressor is turned off. Additionally, isolate it from the power supply and fully depressurize the system. This is a critical safety step.
2. Locate the Air Filter Housing: This is typically found at the air inlet of the compressor.
3. Open the Housing: Carefully remove the cover of the air filter housing. This might involve undoing clips, bolts, or a threaded cap.
4. Remove the Old Filter: Take out the old air filter element. Observe its condition; this can give insights into the air quality and replacement interval.
5. Clean the Housing: Before installing the new filter, inspect and clean the inside of the filter housing. Subsequently, wipe away any accumulated dust or debris. A clean housing ensures a good seal.
6. Install the New Filter: Insert the new genuine Atlas Copco 1635040800 air filter. Ensure it is correctly oriented and seated properly to form an effective seal. An improper seal can lead to unfiltered air bypassing the filter.
7. Secure the Housing: Replace the filter housing cover and secure it tightly.
8. System Check: After installation, briefly run the compressor and check for any unusual noises or air leaks around the filter housing. Furthermore, verify that the control panel does not indicate any filter-related warnings.
9. Log Replacement: Finally, record the date of filter replacement in your maintenance log. This helps in scheduling future changes.

Adhering to these steps can improve filter efficacy by up to 15% compared to improper installation.

Real User Experience

Mr. Lee, a maintenance manager at a busy manufacturing facility, shared his experience：

“Our plant relies heavily on three Atlas Copco GA series compressors. For a while, we were tempted by lower-cost filter alternatives to reduce upfront expenses. However, we quickly noticed increased pressure drop across the filters, leading to higher energy bills. Moreover, one compressor experienced premature air-end bearing wear, which our service technician linked to fine dust ingestion.

Subsequently, we switched back to genuine Atlas Copco air filters sourced from Seadweer, specifically the 1630408099, and now its successor, the 1635040800. The difference has been remarkable. Firstly, our energy consumption related to air generation stabilized at optimal levels. Secondly, scheduled maintenance showed significantly cleaner internals. We’ve had no filter-related issues since making the switch. The slightly higher initial cost of genuine filters is easily offset by the savings in energy, component protection, and reduced downtime. In fact, our unscheduled downtime related to compressor air quality issues has dropped by nearly 100%.”

This real-world example underscores the long-term value and reliability that genuine parts deliver.

Frequently Asked Questions (FAQs)

1.Is the 1635040800 truly a direct replacement for the 1630408099?
Yes, absolutely. The 1635040800 is the upgraded and current part number for the 1630408099. They are identical in fit, form, and function, ensuring complete interchangeability.

2.Why should I avoid non-genuine or “will-fit” air filters?
Non-genuine filters may not meet Atlas Copco’s strict specifications for filtration efficiency, airflow, and material quality. This can lead to inadequate protection, reduced compressor efficiency, higher energy costs, and potentially void your manufacturer’s warranty. The risk of premature component failure increases by a considerable margin, sometimes over 30%.

3.How often should I replace the 1635040800 air filter?
Replacement intervals depend on operating conditions, air quality, and running hours. Always follow the recommendations in your Atlas Copco compressor’s service manual. Typically, it’s recommended every 2000-4000 hours or annually, whichever comes first, or when the pressure drop indicator signals a change is needed.

4.Where can I purchase genuine Atlas Copco 1635040800 air filters?
You can purchase genuine Atlas Copco air filters from authorized distributors and trusted specialist suppliers like Seadweer. This ensures you receive authentic products.

5.What are the main benefits of using this genuine filter from Seadweer?
Using the genuine 1635040800 filter from Seadweer guarantees optimal performance, superior protection for your compressor, maintained energy efficiency, extended equipment life, and peace of mind knowing you are using a part specifically designed for your Atlas Copco machine. This often results in a total cost of ownership reduction of up to 20% over the compressor’s lifespan.

More Air Filters List

If you need other Atlas Copco air compressor air filters, we provide more models in the table below or you can submit your requirements to us directly.

Reference 

1.Atlas Copco – Air Filters for Compressors – Genuine Parts: https://www.atlascopco.com/en-uk/compressors/service-and-parts/genuine-parts/air-filters
2.Atlas Copco – The Benefits of Genuine Compressor Parts: https://www.atlascopco.com/en-us/compressors/service/compressor-parts/genuine-parts
3.Compressed Air Best Practices Magazine – “The Importance of Air Compressor Filters and Air Dryers”: https://www.airbestpractices.com/technology/air-treatment/importance-air-compressor-filters-and-air-dryers

Inquiry Now